Details of required fire protection systems and user controls.Accessible plumbing facilities and details.Accessibility provisions including but not limited to access to services, seating, dining, listening systems, accessible fixtures, elevators, work surfaces, etc.Adequate details and dimensions to evaluate the accessible route to areas required to be accessible, including corridors, doors, protruding objects, maneuvering clearances, clear floor space at fixtures and controls, etc.Adequate details and dimensions to evaluate accessible means of egress, including occupant loads for each floor, exit arrangement and sizes, corridors, doors, stairs, ramps, handrails, areas of refuge, etc.Fully dimensioned drawings to determine areas and building height.Accessible parking, other locations of public access to the facility, accessible exterior routes and locations of accessible entrances.Established street grades and proposed finished grade.Location of any recreational facilities (i.e., pool, tennis courts, etc.).Details and plans drawn to scale with sufficient clarity, details and dimensions to show the nature and extent of the work proposed. Complete signed and sealed (as required by applicable laws) architectural plans and material specifications of all work.In order to perform a thorough Accessibility Plan Review, the following specifications, drawings and details should be submitted: Loop 1604, IH 35 and State Hwy 218).Īccessibility Plan Reviews are based on the specified edition of the ICC/ANSI A117.1 standard as referenced by the 2018 International Building Code® (IBC®) unless otherwise directed. Traffic Study must be submitted if the proposed build fronts or backs a major thoroughfare (i.e.Applicable construction standards and material specifications (i.e., masonry, concrete, wood, steel, etc.).Provisions for required special inspections.Details of foundations and superstructure.Local design load criteria, including: frost depth live loads snow loads wind loads earthquake design data other special loads.Signed and sealed structural design calculations which support the member sizes on the drawings.Soils report indicating the soil type and recommended allowable bearing pressure and foundation type.Structural plans, specifications, and engineering details to include:.Details of required fire protection systems.Details of plastic, insulation, and safety glazing installation.Adequate details to evaluate fire restrictive construction requirements, including data substantiating required ratings.Description and details of proposed special occupancies such as a covered mall, high-rise, mezzanine, atrium, public garage, etc.Exit signs/means of egress lighting, including power supply.Adequate details and dimensions to evaluate means of egress, including occupant loads for each floor, exit arrangement and sizes, corridors, doors, stairs, etc.Fully dimensioned drawings to determine building areas and height.Proposed type of construction of the building.The design approach for mixed-uses (as applicable). Description of uses and the proposed occupancy group(s) for all portions of the building.Architectural plans and specifications to include:.Established street grades and proposed finish grades.Distances from lot lines and any existing buildings or structures.Size and location of all new construction and all existing structures on the site.A site plan including the following information:.Complete signed and sealed (as required by applicable laws) architectural plans, structural plans and material specifications of all work.In order to perform a thorough Building Plan Review, the following specifications, drawings and details should be submitted:
PARKIING GARAGE FIRE SPRINKLER DESIGN DENSITY CRITERIA CODE
Building Plan Reviews are based on the 2018 International Building Code unless otherwise directed.
0 kommentar(er)
